COMBO BLOWING FILLING CLOSING MACHINE

COMBO BLOWING FILLING CLOSING MACHINE

CAPACITY: 28000 BOTTLES / HOUR

INFLATION SECTION

- The system is Industrial PC electronically controlled.

- Bottle changing is very practical as bottle production parameters can be recalled immediately from memory.

- Machine monitoring and operator intervention are very easy with the 15'' color TFT Touch screen.

- Since the industrial PC has an Ethernet port, it has the ability to instantly intervene in customer process problems via the internet.

- All process parameters, including temperatures, can be adjusted via Industrial PC.

- It is equipped with safety covers in accordance with European norms.

- All bottle volumes it can work with are between 0.25LT and 2.0LT

- Precise process monitoring system with independent pressure time graph for each mold chamber

- Very sensitive pre-blowing process with electronic servo controlled tension unit

- Waste-free transfer process with electronic servo-controlled vise and preform transfer group

- 10% additional energy saving with 48 mm axis spacing oven wheel system

- Uninterrupted and fast production with continuous furnace system

- With its non-mechanical cam machine design, maintenance costs are low, fast, sensitive, vibration-free and quieter machine structure.

- Stable operation and long life with rigid machine body structure

- Air recovery system is available

- Possibility of saving up to 25% with air recovery system

- Preform decontamination is available

FILLING AND CLOSING SECTION

- Monoblock: It is a machine that fills and caps empty bottles coming from blow molding on the same body. There is no mechanical connection between the filling group and the capping group. Very precise synchronization is achieved with Sevro motors. Since the bottle outlet is elevator type, there is no need to adjust the conveyor paths up and down when changing the type.

- Gravity Filling: Filling takes place completely mechanically, according to the principle of gravity. The filling process begins when the bottle presses on the valve and seals. As soon as the level reaches the desired point (air return hole), the excess product is taken from the air return path to the ground tank and returned to the system. Thus, it is smooth and precise. Filling takes place. Thanks to the umbrella type filling system, very fast filling is achieved since the filling water and the air in the bottle do not collide.

- Carrying from the Neck: It is the system that performs the filling and capping process by carrying the bottles from the neck. Since the number of parts that need to be changed when changing the bottle type (size) is very low and it does not require height adjustment, the type change time is very short. Moreover, since it grips the bottle from the neck during transportation, it prevents scratches and wear on the bottle. .

* UV available on cover runner

* Numbered bottle tracking system (Closing the bottle produced in mold no. 1 in the capping head no. 1. For easy tracking of maintenance workers)